Evolution Express Set Includes:
· DCS210+ Command Station/Booster With Intelligent AutoReverse
· DT602 Super LocoNet Throttle
· UP5 Universal Panel
· PS615 Power Supply
· Evolution Express Manual
The DT602 Advanced Super Throttle & DCS210+ Advanced Command Station Offers
· Works with compatible LocoNet systems
· Color 2.4” LCD Display Screen
· Advanced menu system and displays
· Built-in scrolling help and prompting
· Soft ON/OFF switch, with zero OFF power-drain
· Advanced display Power Saving for longer wireless battery operation
· No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!
· Can use recharged AA batteries
· Available in standard tethered or Radio Duplex
· Duplex Scan for available Networks and radio signal strength. Run without cords!
· All throttles come with a LocoNet cord that can be unplugged, and is replaceable
· Dual throttle controls let you control two locos simultaneously
· Run locomotives with “encoder click” knobs for both speed and direction control
· Full numeric keypad makes loco selection simple
· Control light and sound effects functions with the press of a button
· Control 29 functions (F0-F28).
· Function active/inactive indicators
· Convenient step-by-step throttle option set up
· Supports simplified decoder programming
· Simplified 2 or 4 digit addressing setup
· Over 9,000 locomotive decoder addresses
· Supports turnout and stationary decoder control
· Over 2000 turnout decoder addresses
· Fast clock display
· Recall feature
· Advanced Route editor
· USB Interface
Big System Capacity for Big Layouts
· Run up to 100 addresses at the same time on your system.
· Run up to 100 throttles at the same time on your system.
Over 9000 Locomotive Addresses
· Address 00 for operation of one loco or MU consist without decoders
· Two Digit Addressing is easy to use. (Address 01-127)
· Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
5 or 8 Amps of Power to Run More Trains
· Selectable Scale Voltage for Safe Operation in ALL Scales
· Customizable Voltage Settings
· 5 amps of power with included PS615 power supply
· 8 amps with PS2012E power supply (sold separately)
Function Control
· Control 29 functions (F0-F28).
· Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
· Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
· Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
· Use one output for a braking section while the other runs the layout.
Decoder Programming
· Built in read/write programmer lets you program and read back CV values.
· Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming
Consisting
· Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
· Advanced consisting and Basic consisting, too!
· Nested consisting where consists can be consisted together.
Stationary Decoders, Turnout Control & Turnout Position Reporting
· Access to stationary decoder control for turnouts and other devices.
· DT602 reports turnout position based on last command sent.
· Control 2000+ stationary decoder addresses.
Routes
· Turnout List/Route capability to simplify complex yard operations.
· EZ routes button for simplified Command Station route programming
Customizable System Options
· Turn audible warnings on or off.
· Set up purging options.
· Multi-format command station mode.
· Loco Reset button for easy system purging
UP5 Universal Panel
· Makes LocoNet hook up simple!
· 2 LocoNet jacks for hooking up your LocoNet network.
· 3 throttle jacks for hooking up throttles and other non-RailSync devices.
Expandability
· Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
· With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
· DCS210+ comes with 3 LocoNet ports for easy expandability and a USB interface!
Other Advanced Features
· IPL updatable firmware for continued product improvements
· Device Query and Device Statistics to help with troubleshooting
· Input Mode to help set up detection on your layout
· Uses Expanded slots
International versions available for
· Australia
· European Union
· Germany
· Ireland
· New Zealand
· South Africa
· United Kingdom